1. What is a 10mm Pea Stone Calculator?

Definition: This calculator estimates the volume of 10mm pea stone needed based on the area dimensions (length, width, and depth).

Purpose: It helps landscape professionals and homeowners determine how much pea stone is required for projects like pathways, driveways, or decorative landscaping.

2. How Does the Calculator Work?

The calculator uses the formula:

Where:

• \( V \) — Volume of pea stone (cubic yards)
• \( L \) — Length (feet)
• \( W \) — Width (feet)
• \( D \) — Depth (feet)
• 27 — Conversion factor (cubic feet per cubic yard)

Explanation: The length, width, and depth are multiplied to get cubic feet, then divided by 27 to convert to cubic yards.

3. Importance of Pea Stone Volume Calculation

Details: Proper volume estimation ensures you purchase the right amount of material, avoiding costly overages or project delays from shortages.

4. Using the Calculator

Tips: Measure your area carefully in feet. For depth, consider both the base layer and top layer if applicable. All values must be > 0.

5. Frequently Asked Questions (FAQ)

Q1: What is 10mm pea stone?
A: It's a small, rounded gravel stone approximately 10mm in diameter, often used for landscaping and drainage applications.

Q2: How do I measure depth for irregular areas?
A: Take multiple depth measurements and use an average, or calculate different sections separately.

Q3: Should I account for compaction?
A: Yes, pea stone typically settles about 10-15%. Consider adding this to your calculated volume.

Q4: How many cubic yards are in a ton of pea stone?
A: Approximately 1.25 cubic yards per ton, but this varies by moisture content and stone density.

Q5: What's the recommended depth for different applications?
A: Typically 2-4 inches for pathways, 4-6 inches for driveways, and 1-2 inches for decorative topping.

10mm Pea Stone Calculator© - All Rights Reserved 2025